About Services Tools Blog Contact us

Camera Stream onto a Badge

A small camera board sends a small colour picture over a direct radio link, and a conference badge draws it as a grid of coloured blocks. If a piece is lost, the previous picture stays in that block.

  • Embedded & IoT
  • Outdoor events
  • Hardware
  • Bespoke
  • Local/private
  • 2026

The problem

The badge has no camera, and normal video is too big for a small radio message or for the badge's picture decoder. Sending a compressed photo was considered and set aside in favour of a simple raw picture the badge can draw directly.

What it does

The camera board cuts a 96 by 96 colour picture into pieces small enough to send by radio, and the badge reassembles them with no wifi router needed. The badge draws the picture as coloured rectangles because its display can only decode still images. A lost piece leaves the previous pixels in place.

Outcomes

  • A badge with no camera shows a live view from a small companion board.
  • The stream fits the size of a radio message.
  • Lost pieces show as older blocks and the picture does not freeze.
  • No wifi router is required.

Simplified mockup

Interactive preview with sample data. Nothing is sent to a server.

Camp test card

Channel 1
Camera board 96 by 96

Source frame on the companion board. The badge has no camera of its own.

Round display blocks, not a photo

Each block is a rectangle. A lost chunk keeps the previous colour.

8 blocks will stay stale
Waiting for a frame

Frame 18, one packet per block

64 chunks · index, then pixels
IndexBlockBytesStatus
0A1240arrived
5F1240Missed
14G2240Missed
19D3240Missed
22G3240arrived
27D4240Missed
36E5240Missed
44E6240Missed
51D7240Missed
58C8240Missed
63H8240arrived

A missed index is not retried this frame. That block stays on the colour from the frame before, so the picture softens instead of freezing.

Shared channel, no access point

Channel
1
both boards
Packet cap
240
bytes of pixels
Join a network
No
connectionless
Frames painted this minute

The dip is missed airtime, not a decoder stall. The last good pixels stay on screen.

How it works

  1. The camera board captures a 96 by 96 colour picture.
  2. The picture is cut into pieces that fit a radio message, each numbered.
  3. Both boards use the same radio channel with no wifi router.
  4. The badge puts the pieces back together in memory.
  5. The picture is drawn as a grid of rectangles rather than as one decoded image.
  6. A missing piece leaves the previous colour in that block, so the picture degrades gently.

Pipeline

flowchart LR
  Cam[Camera board] --> Frame[96 by 96 frame]
  Frame --> Chunks[Radio-sized chunks]
  Chunks --> Air[Connectionless link]
  Air --> Buffer[Badge framebuffer]
  Buffer --> Blocks[Grid of rectangles]
  Loss[Lost chunk] --> Blocks