Turns the motion sensor in a round conference badge into a scrolling live graph with a simple strength reading. Buttons switch between directions of movement.
Embedded & IoT
Outdoor events
Hardware
Productised
Local/private
2025
The problem
A festival badge has a motion sensor that visitors never see working, so there is no obvious way to show vibration, tilt or a shake live. Without a simple interface, every new badge program starts from the chip instead of from tilt and shake.
What it does
The badge keeps a short window of readings and resizes the graph so a tremor and a hard shake both fill the round display. The biggest movement becomes a demonstration figure from zero to ten, coloured as it climbs, and buttons cycle through directions. The same readings are offered as tilt and shake signals for the next program.
Outcomes
Visitors can see the motion sensor working within a few seconds.
A small shake and a hard shake both stay on screen.
The strength figure is a demonstration scale capped at 9.9.
The next badge program can use tilt and shake instead of starting from the chip.
Simplified mockup
Interactive preview with sample data. Nothing is sent to a server.
Live vibration
Motion trace
100-sample window
Demo scale 0.0 to 9.9
VIBRATION
Y axis
R4.2
peak 3.981 · +/- 5.37
Shake the badge
0–1.92–4.95–9.9
The trace grows with the shake, then clips to the round plot. The +/- figure is the auto-scale window.
Latest
2.87 m/s²
Window
100
samples
Axes
X Y Z
plus magnitude
Tilt and shake
Tilt
+12°
Tilt
The lamp lights once lean passes 8 degrees. A later program polls this instead of the chip.
Shake
R4.2
From the trace slider. Lights from 3.0, red from 5.0.
Poll
Waiting for a poll
Sample window
Baseline
Tilt
Shake
What the next program reads
Event
Value
State
tilt
+12°
ready
shake
R4.2
shake
Z-axis spectrum
16 bands from a 64-point window
Same sensor, Z axis only. The loudest band is marked after the window is taken.
Capture
Ready to sample
Dominant band
peak 42 Hz
Estimated from the window, not a calibrated meter
How it works
The built-in sensor is read at a steady rate into a short window of readings.
The graph resizes so a tremor and a hard shake both fill the round display.
The biggest movement from a running average becomes a figure from 0.0 to 9.9.
The figure is coloured green, yellow or red as it climbs.
Buttons cycle through the three directions, the combined strength, and a credits screen.
Tilt and shake are also offered as signals so the next badge program can use them.
Pipeline
flowchart LR
Imu[Accelerometer] --> Window[Sample window]
Window --> Scale[Auto-scale the trace]
Scale --> Screen[Scrolling waveform]
Window --> Peak[Peak against a baseline]
Peak --> Mag[Coloured magnitude]
Buttons[Axis buttons] --> Screen