About Services Tools Blog Contact us

Sheet Cutting Yield Planner

Calculates how many smaller pieces fit on a full sheet, draws the cut layout, and can post a stock correction back to Brightpearl.

  • Stock & Inventory
  • Specialist sheet materials
  • Tool
  • Productised
  • Hybrid
  • 2026

The problem

Estimating yield by eye wastes full sheets. After cutting, the stock figures drift because nobody writes the offcuts and the pieces back. Buyers and the saw bench are working out the same sum separately, and a layout that looked fine on paper can leave a strip nobody can sell.

What it does

The planner fits smaller pieces onto a full sheet, allowing for blade width, and draws the layout. It reports piece count and waste for several cutting layouts: a simple grid, mixed orientation, free arrangement and straight-through saw cuts. A stock correction can be posted back, so Brightpearl loses the full sheet and gains the pieces.

Outcomes

  • Yield is a number and a drawing instead of an estimate by eye.
  • Blade width is included, so the count matches the saw.
  • Several cutting layouts can be compared on the same sheet.
  • Stock can be corrected from the cut that was planned.

Simplified mockup

Interactive preview with sample data. Nothing is sent to a server.

Cut layout

Piece Scrap Kept offcut
Pieces
8
Waste
9.3%
Yield
90.7%
2440 × 1220 mm Clear cast, 3 mm, bin A-12

Mixed orientation adds a rotated shelf. It beats the grid by 2 pieces.

Packing modes

Same sheet, same blade. The table follows the piece size on the layout tab.

750 × 450 mm on 2440 × 1220, blade 4 mm
ModePiecesWasteWhat is left
Grid632.0%No rotation. The L-shaped remainder is scrap.
Mixed89.3%A rotated shelf beats the grid by 2 pieces.
Free pack89.3%Same yield, offcut pushed to one edge.
Guillotine632.0%Through-cuts only. Kept offcut 2440 × 316 mm.
Oversized preset 0 pieces

A 2500 × 800 mm piece does not fit on 2440 × 1220 mm. The long side is wider than the sheet and longer than the short side, so neither orientation lands. Choose it on the layout tab to see the empty sheet.

Stock correction

Ready to post

Consume 1 sheet of 2440 × 1220 mm and add 8 pieces of 750 × 450 mm.

Posting
Waiting for confirm

Sample match

380 × 260 mm

A colour-match sample, not a resale panel. The matcher tries the guillotine offcut before it touches a full sheet.

Where it can come from
CandidateOn handFit
Guillotine offcut 2440 × 316 mm1No380 mm side exceeds 316 mm
Clear cast 3 mm, 2440 × 1220, bin A-1414YesCorner cut, sheet stays on hand
Trade panel 750 × 4500SkipThat size is for resale, not a swatch
Corner of the full sheet

One sample from the corner. The rest of the sheet is still a full sheet for the forecast.

How it works

  1. Choose the source sheet and the target piece size.
  2. Set the blade width, the margin and the cutting layout.
  3. Work out how many pieces fit and how much area is waste.
  4. Draw the layout as a picture.
  5. Optionally post a stock correction that removes the source sheet and adds the pieces.

Pipeline

flowchart LR
  A[Source sheet] --> C[Pack]
  B[Piece size] --> C
  D[Blade width] --> C
  C --> E[Piece count]
  C --> F[Layout drawing]
  E --> G[Stock correction]